The4bangertj
Cutting down the weight 24 From Rexburg, Idaho
Latest activity Postings Attachments Images About
-
-
Cargo rack, version 2.0, with puppy delete. The angle I took the photo at makes it look unlevel, but it is. -
The4bangertj replied to the thread Ohio JCR off road aluminum half doors, trail doors.I’d be interested if you shipped them.
-
I am not Shawn but I have a week or two of building driveshafts under my belt so here is my $.02 1. What is the biggest mistake owners...
-
The4bangertj reacted to Shawn at Tom Wood's's post in the thread Questions for Shawn at Tom Woods with
Like.
1.What is the biggest mistake owners make installing drive shafts? Not remembering to grease the centering ball in the double cardan... -
The minor big remaining portion of the highline installation is to rework the ARB compressor and locker switches wiring harness to send...
-
The4bangertj reacted to JMT's post in the thread More questions about Jeep: looking for opinions with Like.
I’d get some 33’s, regear it, and BMB brake pads with centric rotors. (4” lift is too much for 31’s. They’ll look like donuts)
-
@Shawn at Tom Wood's , thanks for saying yes to doing this and being here to share you knowledge. Thought it would be nice to pick his...
-
The4bangertj reacted to AirborneTexasRanger's post in the thread Doing It The Hard Way - JL Steering Box and a Front Stretch with Like.
Did it look kinda like this? Edit: reason I ask is that if there's sugaring/oxidation, you can minimize it by welding short segments...
-
The4bangertj replied to the thread NP231 no low range (not a shifter issue).Hard to tell and if there is any issue you’ll probably have to open it up anyways. 231 is super simple and I’ve had mine apart more than...
-
Ended up welding the flat bar braces on to the rack. One of the things I don't have patience for when fabricating or modifying something...
-
The4bangertj reacted to AirborneTexasRanger's post in the thread 4-cylinder cross country crawler build with Like.
I don't know. There's too many variables. It looks like you wanted a wider weld so probably.
-
The4bangertj replied to the thread 4-cylinder cross country crawler build.That makes a lot of sense, thank you. Did I really need a second pass on those in the first place?
-
The4bangertj reacted to AirborneTexasRanger's post in the thread 4-cylinder cross country crawler build with Like.
Not bad. Overhead welding at an angle while laying on your back is not easy. With that, it looks like you might be moving too fast. Your...
-
The4bangertj reacted to tworley's post in the thread 4-cylinder cross country crawler build with Like.
@AirborneTexasRanger has been good at picking apart welds. He might have some tips for you!
-
The4bangertj replied to the thread 4-cylinder cross country crawler build.Forgot I also welded in some Currie mini skids. Tried to do a double pass on them after they cooled and the second pass made it look...
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
