TurboTJ
TJ Addict From Walnut Creek, CA
Latest activity Postings Attachments Images About
-
-
TurboTJ replied to the thread Excessive Drive Shaft Angle.The angles look fine to me. When is the last time you greased the centering ball in the double Cardan? I’ll bet that is what failed. -
TurboTJ replied to the thread Removing rear driveshaft to test for vibes.I had it too. It was on, off, on, off, just like you said. It went away when either the front or rear drive shaft was removed. I had the...
-
TurboTJ replied to the thread Violent vibration at 60 mph on highway as accelerating..You said it happened before and after you replaced and balanced the tires so I discounted that possibility. Still, it seems an awful...
-
TurboTJ replied to the thread Violent vibration at 60 mph on highway as accelerating..If the double Cardan is going bad and causing a lot of vibration you should not even move the Jeep. That is why I say disconnect the...
-
TurboTJ replied to the thread Violent vibration at 60 mph on highway as accelerating..Death wobble. Rebuilding the double Cardan in the drive shaft takes maybe $100-$150 in parts. To be honest, it might be better to...
-
TurboTJ replied to the thread Violent vibration at 60 mph on highway as accelerating..If it is not DW and not tire balance, then maybe a bent wheel or axle shaft? I would also be suspicious of the drive shaft double Cardan...
-
TurboTJ replied to the thread Flat tow disaster.https://4xshaft.com/blogs/general-tech-info-articles/diy-u-joint-replacement
-
TurboTJ replied to the thread Flat tow disaster.I have flat towed my TJ about 40k miles now. But…. I grease the centering balls often and at the first sign of any trouble I replace...
-
-
TurboTJ replied to the thread Pulls on acceleration and dives back other direction when let off on acceleration.I can't really tell from the pictures but it does look like you have a dropped track bar frame mount. If you do, you also need a...
-
TurboTJ replied to the thread Pulls on acceleration and dives back other direction when let off on acceleration.It looks like you have some sort of dropped frame side track bar mount. Do you also have a dropped Pitman arm?
-
TurboTJ replied to the thread TJ Unlimited Rubicon Front Driveshaft U-Joint.On mine it had both.
-
TurboTJ replied to the thread TJ Unlimited Rubicon Front Driveshaft U-Joint.There are clips on the inside. Just melting the plastic is not enough. You have to remove the clips.
-
TurboTJ replied to the thread Electric window kit for a TJ question.“Electric Life”
-
Yeah, I thought about just pulling it out untill I had time to mess with it. Luckily it’s not my DD.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
